The Bonneville black full-grain leather jacket, heritage motorcycle style

Bonneville

€494,95 EUR
EUR

Size Chart

Size Chart Disclaimer and Measurement Guide

Important Notice:

Our size chart reflects the exterior measurements of each jacket—not the internal space available once you factor in the lining and room for clothing. To ensure a proper fit, you’ll need to add extra centimeters to your actual body measurements. Please refer to the guideline below to determine how much additional room you’ll need based on your desired fit.

 

 

General Sizing Guidelines:

  1. Determine Your Size:
  • Measure your chest and bottom (at the widest point—either your chest or stomach, whichever is larger).
  • Use the guide below to add the appropriate amount of ease depending on your fit preference:

Slim Fit: add 6–8 cm to your body measurement (suitable for light layers; T-Shirts, henleys)

Standard Fit: add 8–12 cm to your body measurement (suitable for layering over a hoody)

Relaxed Fit: add 12–15+ cm to your body measurement (looser fitting/ very relaxed) 

  • If you’re between sizes, we recommend choosing the larger size for comfort, especially for heavier leathers or lined jackets.
  • If you plan to wear heavier layers, add an additional 2–4 cm to your base measurement.
  1. Special Considerations for Vests:
    For our Gunslinger and High Noon vests:
  • Add 2–4 cm to your chest and bottom for a fitted look
  • Add 4–6 cm for a standard fit

Measurement Instructions:

Chest Measurement:

Use a soft measuring tape (not a metal one). Wrap it around the fullest part of your chest, just under your armpits, while standing relaxed with good posture. The tape should sit snugly but not tightly.

Bottom Measurement:

Measure around the widest part of your waist or stomach—whichever is larger—to ensure the jacket can zip or button comfortably.

Sleeve Length:

Measure from the tip of your shoulder (or your clavicle) down to where your wrist meets your hand. Your height is typically correlated to sleeve length—please keep that in mind if you’re taller or shorter than average.

Additional Tips:

  • We strongly recommend adding the appropriate ease as listed above to your body measurements before referencing the size chart.
  • For heavier layers or broader builds, use the higher end of the recommended ease range.
  • If possible, have someone assist you with taking your measurements for better accuracy.

Note:

Our jackets are handmade, so please allow for a +/- 1 cm variance. If you need assistance with sizing, feel free to reach out through our Contact Page—we’re happy to help.




Here is a YouTube video that can help with how to properly capture measurements: 

Size Chart Video

Shipping calculated at checkout.
SIZING CHART
×
JACKET MEASUREMENTS
Size Chart Disclaimer and Measurement Guide

Important Notice:

Our size chart reflects the exterior measurements of each jacket—not the internal space available once you factor in the lining and room for clothing. To ensure a proper fit, you’ll need to add extra centimeters to your actual body measurements. Please refer to the guideline below to determine how much additional room you’ll need based on your desired fit.

 

 

General Sizing Guidelines:

  1. Determine Your Size:
  • Measure your chest and bottom (at the widest point—either your chest or stomach, whichever is larger).
  • Use the guide below to add the appropriate amount of ease depending on your fit preference:

Slim Fit: add 6–8 cm to your body measurement (suitable for light layers; T-Shirts, henleys)

Standard Fit: add 8–12 cm to your body measurement (suitable for layering over a hoody)

Relaxed Fit: add 12–15+ cm to your body measurement (looser fitting/ very relaxed) 

  • If you’re between sizes, we recommend choosing the larger size for comfort, especially for heavier leathers or lined jackets.
  • If you plan to wear heavier layers, add an additional 2–4 cm to your base measurement.
  1. Special Considerations for Vests:
    For our Gunslinger and High Noon vests:
  • Add 2–4 cm to your chest and bottom for a fitted look
  • Add 4–6 cm for a standard fit

Measurement Instructions:

Chest Measurement:

Use a soft measuring tape (not a metal one). Wrap it around the fullest part of your chest, just under your armpits, while standing relaxed with good posture. The tape should sit snugly but not tightly.

Bottom Measurement:

Measure around the widest part of your waist or stomach—whichever is larger—to ensure the jacket can zip or button comfortably.

Sleeve Length:

Measure from the tip of your shoulder (or your clavicle) down to where your wrist meets your hand. Your height is typically correlated to sleeve length—please keep that in mind if you’re taller or shorter than average.

Additional Tips:

  • We strongly recommend adding the appropriate ease as listed above to your body measurements before referencing the size chart.
  • For heavier layers or broader builds, use the higher end of the recommended ease range.
  • If possible, have someone assist you with taking your measurements for better accuracy.

Note:

Our jackets are handmade, so please allow for a +/- 1 cm variance. If you need assistance with sizing, feel free to reach out through our Contact Page—we’re happy to help.




Here is a YouTube video that can help with how to properly capture measurements: 

Size Chart Video


HOW TO GET MEASUREMENTS

 
 
 
DESCRIPTION

The Bonneville is built with 1.5mm full vegetable-tanned cowhide, finished with a black pigmented topcoat over a drum-dyed rust-brown core, designed to show contrast as the top finish wears through at high-contact areas.

The body is fully lined in a cotton-poly blend woodland camouflage lining.

Front closure is via a Talon 10mm main zipper, fitted with an arrowhead leather pull tab. The zipper is set with a raised start above the bottom hem to reduce stacking and distortion at the waistband.

The jacket is finished with a low-profile collar with a center-back seam and shortened points, patterned to remain comfortable when worn up.

The back is cut with a bi-swing action back using expansion pleats for added shoulder mobility. It is finished with a fixed half-belt back and side buckle waist adjusters for waist suppression and fit control, with a rear V-yoke and a lower back kidney panel seam visible across the back.

Additional construction details include:
• Angled hand-warmer pockets with clean-cut pocket mouths and reinforced perimeter stitching.
• Single zip-closure chest pocket with chain pull
• Underarm ventilation eyelets (dual metal grommets per side)
• Snap-adjustable cuffs with branded snaps
• Leather buckle tabs with solid metal buckles

The Bonneville is built to break in gradually, conform to the wearer, and develop visible character with continued wear.

Each jacket is designed in Toronto and built in our own dedicated workshop in Pakistan. We oversee every step — from pattern drafting to leather selection to final inspection. Every jacket is individually photographed, measured, and quality-checked before leaving the shop. We produce in small batches using full-grain leathers, custom hardware, and offer complimentary custom sizing on all builds.

FEATURES

  • 1.5mm Tea-Core Vegetable-Tanned Cowhide: Black pigmented topcoat over a rust-brown core that reveals contrast with wear.

  • Half-Belt Silhouette: Structured, balanced profile with classic back detailing and controlled waist suppression.

  • Action Back: Expansion pleats for added shoulder mobility and everyday comfort.

  • Fixed Half-Belt with Side Buckle Adjusters: Integrated waist control for a dialed, vintage-inspired fit.

  • Angled Hand-Warmer Pockets: Clean-cut pocket mouths with reinforced stitching for durability.

  • Low-Profile Stand Collar: Shortened points and center-back seam for comfort worn up or down.

  • Woodland Camo Cotton-Poly Lining: Durable, breathable lining.

  • 2 Interior Pockets: One zip and one open face.

  • Talon 10mm Main Zipper: Heavy-duty zipper with arrowhead leather pull; raised start reduces waistband stacking.

  • YKK Zip Chest Pocket with Chain Pull: Secure storage with vintage detailing.

  • Snap-Adjustable Cuffs: Branded metal snaps for quick fit adjustment.

  • Underarm Ventilation Eyelets: Dual metal grommets per side for airflow.

  • Leather Buckle Tabs with Metal Hardware: Built for long-term wear and fit stability.

FIT


Fit & Sizing Guidance:

For the most accurate fit, we highly recommend having someone assist you when taking your body measurements. Accurate measurements are crucial to achieving the intended fit across all Master Supply Co. styles.

If you have any questions, our team is happy to assist—reach us at info@mastersupply.co.

Model Reference:

  • Height: 6’0” (183 cm)
  • Weight: 175 lbs (79 kg)
  • Wearing Size: US Medium

Layering Tips:

  • Planning to wear heavier layers underneath (like sweaters or hoodies)? We suggest sizing up.
  • Prefer a cleaner, more tailored fit with lighter layers? Stick to your regular size.

Need more help?

If you’re still unsure about sizing, feel free to contact us via email or Instagram. We’re here to make sure you get the perfect fit.


SHIPPING

FREE SHIPPING | US/CAN on orders US$800+

  • THIS JACKET IS FROM STOCK AND IS READY TO SHIP
  • Shipped within 7-10 business days
  • Custom Order: 3-4 Weeks
  • Please note Customers outside Canada that customs and duty fees may be applied by the destination country
The Bonneville black full-grain leather jacket, heritage motorcycle style
Back view of The Bonneville black leather jacket with bi-swing action back and half-belt
Interior woodland camouflage lining inside The Bonneville black leather jacket
Close-up of a black leather jacket with metal buttons on a gray background
Close-up of a black leather belt with a silver buckle on a textured black leather background.
Man wearing The Bonneville black full-grain leather jacket, heritage fit
Close-up of a black leather jacket with a zipper and button details.
Close-up of a Talon zipper on a Bonneville black full-grain leather jacket
Back view of The Bonneville black leather jacket with bi-swing action back and half-belt
Man wearing The Bonneville black full-grain leather jacket
Close-up of a person wearing a black leather jacket with zippers.
Inside storage pocket of The Bonneville full-grain leather jacket
Bonneville

YOU MAY ALSO LIKE

Shop now
Master Supply Co burgundy and off-white trucker cap with Holy Buck Boys patch
Master Supply Co burgundy and off-white trucker cap with Holy Buck Boys patch
Front view of foam trucker hat by Master Supply Co in burgundy and cream
Trucker Cap: Burgundy
€43,95 EUR
EUR
€43,95 EUR
EUR
Master Supply Co Hunter Orange trucker cap with Holy Buck Boys patch
Master Supply Co Hunter Orange trucker cap with Holy Buck Boys patch
Front view of orange foam trucker hat by Master Supply Co
Trucker Cap: Hunter Orange
€30,95 EUR
EUR
€30,95 EUR
EUR
Master Supply Co canvas logo cap in waxed cotton material
Master Supply Co canvas logo cap in waxed cotton material
Front view of Master Supply Co waxed canvas hat with logo patch
Canvas Cap: Black
€30,95 EUR
EUR
€30,95 EUR
EUR
Front view of Master Supply Co waxed canvas logo cap with pre-curved brim and 6-panel design
Front view of Master Supply Co waxed canvas logo cap with pre-curved brim and 6-panel design
Side angle of Master Supply Co waxed canvas cap showing classic profile and stitching detail
Waxed Canvas Cap: Olive
€43,95 EUR
EUR
€43,95 EUR
EUR
Master Supply Co waxed canvas logo cap front view
Master Supply Co waxed canvas logo cap front view
Close-up of waxed canvas texture showing natural patina
Waxed Canvas Cap: Burgundy
€43,95 EUR
EUR
€43,95 EUR
EUR
Behind the Scenes | Lil Jon Photoshoot in Toronto
news

Behind the Scenes | Lil Jon Photoshoot in Toronto

 Hey y'all, Lane here back at it again for another blog instalment.This one is super cool, as I'm sure you've seen some of the images/videos on our socials already - but I never get tired of telli...
Professional Bull Riders | 2022 Canada National Finals
news

Professional Bull Riders | 2022 Canada National Finals

Professional Bull Riders | 2022 Canada National Finals Hey y'all, Lane here from Master Supply Co. We were beyond proud to provide our signature Convoy (with a PBR 2022 back patch) to all 25 Cont...
Master Supply Co | Restomod Nation | Photoshoot
news

Master Supply Co | Restomod Nation | Photoshoot

  Howdy y'all, Lane here for another entry to our blog!This one surrounds a super cool video/photoshoot Josh and I did with fellow Canadian company, Restomod Nation. Owned and founded by Sean Fil...